You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close

Solid Power Light, Blinking Data Light

Just Add Power devices have 2 green lights on the front of the device that are diagnostically relevant: a Power Light and a Data Light. On a rackmount unit, the lights on the port-side are diagnostically relevant.

Receiver Interpretation:

A Receiver with a solid Power Light and blinking Data Light has:

  • Booted up properly
  • An active network connection (not necessarily to another Just Add Power device)

A Receiver with a solid Power Light and blinking Data Light does NOT have:

  • a compatible video signal from a Transmitter
    • Transmitter is not receiving video from the source
    • Receiver is not on the same firmware as the Transmitter
    • Receiver is not on the same IP scheme as the Transmitter
    • The Receiver is unable to communicate with the Transmitter over the network

Transmitter Interpretation:

A Transmitter with a solid Power Light and blinking Data Light has:

  • Booted up properly
  • An active network connection (not necessarily to another Just Add Power device)

A Transmitter with a solid Power Light and blinking Data Light does NOT have:

  • An active video source
    • No video source is connected to the Transmitter
    • Video source attached to the Transmitter is not powered on
    • Video source attached to the Transmitter is passing an incompatible video signal
  • 198
  • 05-Jun-2018
  • 3850 Views