You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.

HDR on 3G

Just Add Power 3G devices on firmware A6.5.0 and later support up to HDR10. HDR can be turned on and off on each Receiver in the system, allowing HDR devices to receive HDR and non-HDR devices to ignore HDR.

HDR is enabled on all 3G Receivers by default as long as the scaler is set to Passthrough. With a scaler enabled, HDR is always disabled.

To disable HDR, send the command: off

To enable HDR, send the command: on

HDR10 is supported at [email protected]/25/24.

HDR10 is supported at [email protected] framerate.

  • 255
  • 09-Oct-2020