Models in the 3G HD over IP System that are labeled as 2GΩ/3G are capable of 1080p resolution maximum, but have all other features of the 3G system. "Receiver" describes the display-side decoding device and there are various models meant for different requirements at the display location. All models are compatible with each other so they can be used in the same installation. Use this article to help with choosing the model that best serves the video, audio, and hardware needs of each display location.\
2GΩ/3G units can also be expansion or replacement units for legacy 2G systems.
If you are planning a 4K project, see the 4K Receiver Comparison article instead.
|1080p video||1080p resolution support up to 1920x1200|
|All audio formats supported||Pass-through audio format from the Transmitter|
|Instant-Seamless Switching||Switch from one source to another without the display realizing the source changed|
|Image Pull||Snapshot an image of video for display on any network-accessible device.|
|Image Push||Upload a custom background image to an idle Receiver.|
|Integrated Video Scaler||Scale video to match the capability of the display|
|Video Wall with Rotation||Combine multiple displays together to build a standard video wall in landscape or portrait orientation.
Build a mosaic video wall made of displays in any rotation from 0-360 degrees.
|Endpoint control||Control sources and displays with RS232, IR*, and CEC.|
|On-Screen Display||Show text over a video signal for messaging or alerts.|
The baseline model - 505POE - is powered by POE and has 1080p video, pass-through any audio, instant-seamless switching, integrated video scaler, RS232/IR*/CEC control, video wall with rotation, image pull, image push, and on-screen display. The models below should be specified if additional features not present on the 505POE are needed.
|Model||Variation from Baseline Model||Example|
1) Stereo Out port
2) USB port
|Add a 1080p display that needs USB or a Stereo Out port|
*IR control requires use of VBS-HDMI-IRD IR Dongle.