[AMP] [Standardized] Q-SYS Driver Download

Overview

This driver package provides Matrix Control and Feature Control of a Just Add Power Standardized AMP system.

Standardized AMP

Matrix Control - switch any display to watch any source
Feature Control - manage features of Just Add Power like video wall, image pull, tiling control

Driver supports up to 101 inputs and 500 outputs

Contracted by Just Add Power.

This driver is NOT COMPATIBLE with systems configured with JADConfig.

To configure the Q-SYS AMP VLAN driver:

Run AMP VLAN to configure the Just Add Power system
Load ONLY ONE instance of the JPSW Matrix Control driver
- In JPSW Properties, enter:
  - the IP address of a single active Just Add Power device. This device will act as the controller for the system and will switch sources for all displays. We recommend using the first Receiver, typically at 172.27.1.1.
  - Port = 23 (default, do not change)
  - Number of Receivers: set to the number of Receivers (displays) in the system
  - Number of Transmitters: set to the number of Transmitters (sources) in the system
- The plugin will expand to show a grid to switch sources on a single Receiver/Transmitter combination
- The Manual Switch option below allows multiple Receivers to be switched to a single Transmitter simultaneously. This function works well for batch switching, like video wall displays.
Load ONE instance of the Receiver driver for EACH Just Add Power device that needs one of:
- Video wall control
- Tiling layout control
- Endpoint control (IR/RS232/CEC) of sources or displays
- A system using none of these features does not need the Receiver driver
Please see the plugin help file for more information

Matrix Control v1.0.0.0
- Just Add Power JPSW.qplugx
Feature Control v1.0.0.6
- Just Add Power - Receiver.qplugx
- DO NOT USE the Multicast Switching field. It will prevent video from functioning. Set to Channel 0 to fix.