Building a Just Add Power 4K HDMI over IP distribution matrix require 4 components:
Each Transmitter and Receiver requires a dedicated cat5e (or greater) network cable coming from the switch location.
See our full Product Catalog and use the resources below to choose the right models of Transmitters and Receivers, choose the right switch for the installation requirements, and find control system drivers to manage it all.
We manufacture multiple models of Transmitters and Receivers to support different hardware requirements at endpoints, and all models within the 3G System can be mixed-and-matched to work together.
View the full Product Catalog.
Compare 4K Transmitters and mix and match to fit hardware features to each source location.
Compare 4K Receivers and mix and match to fit hardware features to each display location.
Consider adding Sound Transceivers as audio-only inputs and outputs that seamlessly combine with standard Transmitters and Receivers.
View Data Sheets for all available models.
If the installation needs the ability to view multiple videos on the same display, consider adding a Tiling Transmitter.
If the installation needs to display a video wall with displays rotated diagonally, consider adding a Warp Engine Transmitter.
If the installation needs to control displays or sources with IR, consider adding Flux Capacitor IR Dongles to convert the RS232 ports on devices into IR emitters.
If the installation needs to store individual units in the rack, consider adding a Rack Shelf.
We support a range of switch sizes from 10 ports up to almost 800 ports made by Luxul and Cisco.
For systems below 50 devices where everything is wired to a single rack, a single switch is all that is needed.
For larger systems - either in device count or multiple rack locations - a Stackable Switch may be better.
We support a range of IP-based control systems - some developed by us, others developed by industry partners - to give you as the Installer the ability to provide the perfect experience for your client.
An IP-based Control System will allow full control of all things Just Add Power.
We provide planning resources before the installation in addition to Technical Support during and after the installation. Contact us via email at firstname.lastname@example.org or phone at 1-800-615-0206 if you're unsure of anything.