You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.

Download JADConfig: Configure a VLAN Switching System


JADConfig is a Windows-only software that will configure a managed Ethernet switch and Just Add Power devices into an HDMI switching matrix. The HDMI matrix uses network infrastructure, but is separate from the main data network; audio/video traffic will not interfere with data traffic.

Begin planning a system here

As of v5.0.0, JADConfig will auto-update when a new version is available.

Current Version


Supported Switches


  • AMS-1208P
  • AMS-1816P
  • AMS-2600
  • AMS-2616P
  • AMS-2624P
  • AMS-4424P
  • XMS-1208P
  • XMS-2624P
  • XMS-5248P
  • XMS-7048P
  • SW-510-48P-F
  • SW-610-24P-R
  • SW-610-48P-F


  • SG300
  • SG350
  • SG500
  • SG500X
  • SG550X
  • CBS

Active Firmware

3G justOS version: B2.1.0

Hybrid (3G units in 2G Mode): A6.5.9-LTS.v3

2G: A5.3.1

Recent Changes

  • Add support for new Cisco CBS switches
  • Minor bug fixes for larger system interrogation
  • Fixed an issue where Transmitter ports were incorrectly assigned membership in VLAN 2 after configuration

Known Issues

  • When downsizing a system by removing Receivers, ports that were previously Receivers will still be configured as if they are Receiver ports. May cause a linked driver to read the port as a Receiver port incorrectly.


For assistance with running JADConfig or for troubleshooting help, give us a call or Submit a Ticket.

Windows on Mac hardware

We suggest that JADConfig only be run on native Windows hardware to ensure the smoothest configuration process.
We have experienced issues with virtual machines and parallels related to properly bridging the network adapter settings from the Mac to the Windows side. Ideally, the Windows adapter should show the exact same settings as the Mac adapter, but that alone does not guarantee success.
Results include: failure to discover units, failure to configure units, failure to firmware update units resulting in damage to the units, and working perfectly fine the whole way through.
Because of the nature of Mac hardware updates, success one time does not guarantee success at all times.

Legacy Version (v3.x.x)

JADConfig v3.x.x can be uninstalled without affecting v5.x.x

  • 69
  • 18-Oct-2021