![][1] Download Spec Sheet ## Model Number VBS-HDIP-718WP4 ## Description The 3G 4-Gang Wallplate Transmitter is the source-side device in a full Just Add Power 3G Ultra HDMI over IP 4K switching matrix and fits in a standard 4-gang construction box for easy wall-mounting. ## Features * 4K video and HDCP 2.2 ...
The Just Add Power WP2 (2-gang wallplate) and WP4 (4-gang wallplate) have both HDMI and VGA inputs. There is a toggle switch on the front of each unit that is used to choose VGA or HDMI. ![Wallplate 2-gang][1] To enable auto-detection between the VGA and HDMI ports, apply this command through the Console API on the ...
Wall-plate transmitters allow users to chose between VGA and HDMI distribution. There are three ways to chose how formats are toggled between. 1) Use the physical toggle button to switch between VGA and HDMI (factory default setting): astparam s v_input_select auto;astparam save;reboot 2) Detect a change in...
* [Overview][1] * [Planning Considerations][2] * * * ## Overview AVP Transmitters are the only models that process audio in a Just Add Power system. AVP Transmitters will accept stereo audio or Dolby® Digital 5.1, but no higher-level audio formats. When an AVP Transmitter receives a Dolby Digital 5.1 audio signa...
* [Overview][1] * [Access][2] * [Settings][3] * [Formatting][4] * [Audio Input Selection][5] * [Input Switching Behavior][6] * [Set Startup Source][7] * [Commands][8] * [Select Video Input][9] * [Select Audio Input][10] * [Adjust Stereo Out][11] * * * ## Overview Two types of W...
Most Just Add Power devices will not allow an incompatible firmware to be loaded onto them. Unfortunately, the wallplate devices - 717WP2 and 718WP4 - are close enough that their firmware files can be loaded on each other. * [717WP2: 2-gang Wallplate Transmitter][1] * [718WP4: 4-gang Wallplate Transmitter][2] If ...