Once JADConfig has been used to setup the switch and all Transmitters and Receivers, the control system and other network devices are able to communicate with the switch to control HDMI switching. However, the control system and other network devices are not yet able to communicate with the J+P devices to use Layer 3 ...
Once JADConfig has been used to setup the switch and all Transmitters and Receivers, the control system and other network devices are able to communicate with the switch to control HDMI switching. However, the control system and other network devices are not yet able to communicate with the J+P devices to use Layer 3 ...
* [Overview][1] * [Download][2] * * * ## Overview Just Add Power produces RTI drivers to control HDMI matrix switching and endpoint functions. Driver package is based on the model of switch controlling the system * [RTI Cisco Driver Package][3] * [RTI Luxul Driver Package][4] * * * ## Download The link ...
* [Overview][1] * [Download][2] * [Build a Driver][3] * [Setup a Driver][4] * * * ## Overview IR control in URC is best accessed by allowing the Accelerate process to build a user interface automatically. In order to do that through the Just Add Power system, standard IR drivers must be converted to IR over ...
* [Overview][1] * [Download][2] * [Build a Driver][3] * [Setup a Driver][4] * * * ## Overview RS232 control in URC is best accessed by allowing the Accelerate process to build a user interface automatically. In order to do that through the Just Add Power system, standard RS232 drivers must be converted to RS...
* [Overview][1] * [Procedure][2] * * * ## Overview This article addresses how to create Generic devices in Elan to control endpoint functions of Just Add Power: * Video Wall * Tiling Transmitter Video, Audio, and Layout control * Warp Transmitter Rotate and Zoom control This article is still a work in pr...