Firmware A6.5.5 introduced the ability to check the currently detected audio format on both transmitters and receivers. The following commands may be sent via telnet to determine the current audio format: For Transmitters: > cat /sys/devices/platform/1500_i2s/input_audio_info For Receivers: > cat /sys/devices/pla...
* [Overview][1] * [ARC Diagram][2] * [Enable ARC Pass-through][3] * [Reset Devices to Default][4] * * * ## Overview The MaxColor Series 2 Transmitter and Series 2 Receiver - MC-TX2 and MC-RX2 - add support for Audio Return Channel (ARC) when used in a point-to-point connection between a display and AVR that ...
* [Overview][1] * [Set Transmitter/Receiver Mode][2] * * * ## Overview The 3G Ultra ST1 Transceiver is an audio-only endpoint in a 3G Ultra AV over IP system. It can be installed either as a Transmitter - connected to an audio player - or as a Receiver - connected to a speaker or headphones. Setting Transmitter...
## Model Number VBS-HDIP-767AES * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/11/767AES_5-1024x926.jpg ...