Standard Video Wall Setup & Control for Ultra Series
Overview These instructions are for Just Add Power Ultra Series devices running firmware B2.x.x . For older firmware, see A6.x.x Standard Video Wall or B1.x.x Video Wall . A Standard Video Wall is a seamless rectangular grid of displays—same size, same orientation—each with its own Decoder (Receiver). A s…
14-Nov-2025
Setup a Static Route for an Established Just Add Power System
Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Network access to Just Add Power: * Set a Static Route on the router to allow ALL devices on the Data Network to communi…
29-May-2025
CEC over IP Control
Overview CEC - Consumer Electronics Control - is an HDMI feature designed to allow a single remote to control multiple devices by sending commands through the HDMI cable connecting the devices together. For example, the TV remote can be used to control the Blu-Ray player connected to it. CEC works well in a point…
26-Jun-2024
