-
Download - AMX Driver for JADConfig Systems
Legacy For existing JADConfig systems only. End of Support Notice: JADConfig systems will reach End of Support on January 1, 2027. Migration to AMP will be required before the Just Add Power Support Team can provide further troubleshooting or system service. See JADConfig End of Support Notice for requirements…
31-Jul-2026
-
Standard Video Wall Setup & Control (2G Series and 2G Legacy Mode)
The PDF attached to this Knowledge Base article contains detailed step-by-step instructions for how to perform the initial setup, configuration, and control of a Just Add Power 2G Video Wall. Each Just Add Power 2G/2G+ Receiver has the ability to turn any combination of displays (up to 16 rows by 16 columns) mounted…
19-Oct-2026
-
IR Control using the Flux Dongle V1 (Omega & Ultra Series)
Deprecated: This information applies to legacy IRv1 Dongles and should not be used for new IRv2 Dongles. Just Add Power continues to support systems that use this hardware,. Overview The IR Dongle V1 - Flux Capacitor V1 - adds IR support to the Just Add Power 2G and 3G product lines by converting the serial port i…
31-Jul-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
