You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.

⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠

Home > Configuration Software > JADConfig > JADConfig Videos > Setup a New System Using a Cisco SG300 with JADConfig - Video Guide
Setup a New System Using a Cisco SG300 with JADConfig - Video Guide
print icon
Jul 31, 2026

Legacy For existing JADConfig systems only.

End of Support Notice: JADConfig systems will reach End of Support on January 1, 2027. Migration to AMP will be required before the Just Add Power Support Team can provide further troubleshooting or system service.

See JADConfig End of Support Notice for requirements and migration-planning information.

Overview

Just Add Power 2G Series and Ultra Series AV over IP systems support the Cisco SG300 Network Switch.

Video Instructions

Video of the full JADConfig procedure for the Cisco SG300 is available here.

Download JADConfig and follow along with the video to setup your Just Add Power A/V System.

close button
scroll to top icon