Firmware A6.5.9-LTS is intended to be the last firmware that supports 2G devices. It will only be updated to adapt to changes in 1080p sources and displays.
Major Changes
Added support for the 2G/3G SX Sound Transceiver
Operational Mode of the ST1 is dependent on the position of the jumpers on the bottom of the hardware unit
Changing operational mode requires a reboot of the device
Bug Fixes
Devices will now properly default to 2G Mode without needing to manually apply 2gmode.sh
Known Issues
None
Previous A6.5.9-LTS Versions
LTS.BF2
Release Date
2020-05-19
Bug Fixes
CEC now works correctly on 2G units
LTS.BF1
Release Date
2020-02-28
Bug Fixes
Cable and satellite sources no longer freeze video after outputting a bad video frame on resolution change
Satellite boxes no longer output black video when changing resolution on Native Mode
BT2020 Color Space is less dull
HDMI loopout on 715POE is enabled by default
Fixed startup race condition that caused mDNS announcements to report devices as "HTTP on none", causing discovery failures
Corrected update scripts to account for POSIX sh compliance, allowing updates directly from firmware prior to A6.4.12
`getmodel.sh` will not record the discovered model in the filesystem cache until 60 seconds of uptime (to allow for all SCU level checks to complete)
Fixed startup issue that would cause SwitchPlease to fail to load
Known Issues
Some cable/satellite sources can cause an audio drop on 718AVP and 749AVP Transmitters
Fix by disabling mic/line inputs
Fix live by power-cycling the TX or applying `dd_reset.sh` via telnet when the problem occurs