How to Change Device Network Prefix for AMP Standardized Systems
Overview Just Add Power’s Advanced Matrix Programmer (AMP) enforces a standardized IP addressing scheme for all Devices to ensure consistent deployment, reliable communication, and simplified system support. By default, AMP uses the IP subnet 172.27.0.0/16 (255.255.0.0) for the Device Network. This prefix is auto…
23-Mar-2026
CLI Commands for Omega & Ultra Series Devices
Overview Omega and Ultra Series devices use the same firmware and operating system. Commands on Just Add Power alter the live behavior of the device. Commands will execute immediately, but may not persist through reboot. Requires devices to be on justOS firmware version B1.0.0 or later. For Settings that alter …
23-Jun-2025
CLI Settings for Omega & Ultra Series Devices
Overview Omega & Ultra Series devices use the same firmware and operating system. Settings on Just Add Power alter the behavior of the device upon start-up. Settings that are changed will not be active immediately; they will be applied upon the next start-up. Many settings should be altered according to the uniqu…
23-Jun-2025
