* [Overview][1] * [webUI Firmware Update Instructions][2] * * * ## Overview Firmware updates on 2G can be accomplished in two ways: 1. Through the webUI of the device (any firmware version) 2. JADConfig (always applies newest firmware) These instructions cover webUI firmware update Newest firmware is avai...
## Overview In addition to the web-based firmware running on the 2G+4+ Tiling Transmitter, there are two underlying micro-processors that can only be updated using special tools from Just Add Power. While we aim to provide as many updates through the web firmware, occasionally updates to the micro-code are needed to a...
* [Overview][1] * [Do I Need This Update?][2] * [Required Hardware][3] * [Required Software][4] * [Programming Instructions][5] * [SyncMOS SMAP1293 Programming Instructions][6] * [USB Direct Programming Instructions][7] * * * ## Overview In addition to the web-based firmware running on the 3G+4+ T...
* [Overview][1] * [Video][2] * * * ## Overview [AMP - Advanced Matrix Programmer][3] - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system. This video demonstrates updating device firmware in a Standardized Configuration. Work on a Standardized Configuratio...