* [Overview][1] * [Training Video][2] * [Supported Switches][3] * [Luxul][4] * [Netgear][5] * [Cisco][6] * [TP-Link][7] * * * ## Overview Building a Standardized Configuration in AMP will fully configure the switches listed below and make them compatible with Just Add Power-provided [drivers][...
* [Overview][1] * [Training Video][2] * [Supported Switches][3] * [Luxul][4] * [Netgear][5] * [Cisco][6] * [TP-Link][7] * [Stack vs Trunk][8] * [Bandwidth Considerations][9] * [SFP+ Cables][10] * * * ## Overview If the [Right Switch][11] for a Standardized System (also known as a VLAN S...
* [Overview][1] * [Minimum Switch Firmware][2] * [Walkthrough][3] * * * ## Overview Uploading a switch configuration file might be done for any of these reasons: * Copying the configuration from a defective switch into the replacement switch * Running [AMP][4] and loading the Discovery Configuration file ...
* [Overview][1] * [Supported Switches][2] * [Supported Just Add Power Hardware][3] * [Instructions][4] * [Generate Discovery Configuration][5] * [Setup Existing AMS-4424P/XMS-7048P Switches][6] * [Adding a SW-610-24P/48P][7] * [Continue with AMP][8] * * * ## Overview Advanced Matrix Programm...