Overview
Just Add Power 2G Series devices, including 2G+ models, are no longer in production. The compatible Omega Series and Ultra Series models listed below provide replacement options for existing installations.
When operating in 2G Legacy Mode, replacement devices function within the capabilities of the 2G Series system. Replacing an individual device does not upgrade the system to the replacement model's normal Omega Series or Ultra Series capabilities.
Replacement Models
| 2G Series Model | Device Type | Replacement Model |
|---|---|---|
| 208A / 208POE | Decoder | OM-505POE |
| 218A / 218POE | Decoder | OM-515POE |
| 218AVP | Decoder | UL-518AVP |
| 408A / 408POE | Encoder | OM-705POE |
| 418A / 418POE | Encoder | OM-715POE |
| 418AVP | Encoder | UL-718AVP |
Configuration Requirements
For systems configured with AMP, 2G Legacy Mode requires AMP 2.0.0 or later, Standardized Configuration, and L Series firmware. It is not available in Alternate Configuration.
2G Legacy Mode is applied through the system's firmware and configuration; it is not a setting to enable or disable on the replacement device. Configure the replacement for the existing system before placing it into service.
Review 2G Legacy Mode compatibility and device capabilities before selecting a replacement. See the 2G Legacy Mode firmware article for firmware requirements.
