⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Understand 2G Legacy Mode Compatibility
Overview 2G Legacy Mode allows compatible Omega Series and Ultra Series devices to operate with 2G Series Encoders and Decoders. AMP 2.0.0 or later supports these systems through its normal discovery, configuration, and firmware update workflows. On compatible Omega Series and Ultra Series devices, 2G Legacy Mode…
02-Oct-2026
2G Legacy Mode Firmware: L1.1.9.0
Overview Firmware L1.1.9.0 enables 2G Series devices and compatible Omega Series and Ultra Series devices to operate under the JPSW switching structure used by AMP 2G Legacy Mode. This is the first L Series firmware release and requires AMP 2.0.0 or later . L Series firmware is intended only for AMP 2G Legac…
02-Oct-2026
Just Add Power Product Lifecycle and Support Status
Overview This article lists Just Add Power hardware, software, and control system integrations that have reached or are scheduled to reach End of Life or End of Support. It provides applicable support classifications and general replacement guidance. Current products are included only when identified as a suggested …
04-Aug-2026
JADConfig End of Support Notice
Overview AMP launched in 2022 as the replacement for JADConfig. AMP simplifies system deployment and maintenance while providing access to firmware improvements and product enhancements introduced over the past several years. JADConfig-compatible switches have become increasingly difficult to obtain, making existin…
29-Sep-2026
Replacement Models for 2G Series Devices
Overview Just Add Power 2G Series devices, including 2G+ models, are no longer in production. The compatible Omega Series and Ultra Series models listed below provide replacement options for existing installations. When operating in 2G Legacy Mode , replacement devices function within the capabilities of the 2G Se…
02-Oct-2026
KVM Support Overview and System Architectures
Overview KVM support allows a USB Human Interface Device (HID) —such as a keyboard, mouse, or touchscreen—connected to a Decoder to send control input back to a device connected to an Encoder . When combined with native video switching, Just Add Power systems function as both an Audio/Video matrix and a…
22-Jun-2026
How to Control the Power & Data LED of a Device (2G Series and 2G Legacy Mode)
Overview Starting with firmware version A6.5.5 , 2G Series Just Add Power Encoders and Decoders support disabling the Power and Data LED indicators. This feature is useful in environments where visible LEDs are undesirable, such as theaters, conference rooms, or other light-controlled spaces. LED control is…
02-Oct-2026
How to Name a Device (2G Series and 2G Legacy Mode)
Overview Devices running 2G Series firmware A5.21d or later can be assigned a custom webname. The webname appears in the device webUI and helps identify individual Encoders and Decoders within a system. Set the Device Name * Access the device CLI using one of the following methods: Open the device webUI a…
02-Oct-2026
How to Update Firmware (2G Series and 2G Legacy Mode)
Overview The firmware update method depends on how the system is configured: * AMP 2G Legacy Mode: Use AMP 2.0.0 or later to apply L Series firmware through its configuration workflow. * Established A Series systems: Use the A Series maintenance instructions below when the system is remaining on A Series firm…
02-Oct-2026
2G Series Encoder-to-Decoder Latency
Overview Just Add Power Encoders convert HDMI signals into network packets for transport across the network. Decoders convert those packets back into HDMI for display. This encoding and decoding process introduces a small amount of video latency. Latency Specification 2G Series systems have approximately 37 milli…
26-Aug-2026
