⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
How to Name a Device (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series devices can be assigned a custom device name. Naming devices makes it easier to identify individual Encoders and Decoders when configuring, accessing, or managing a system. When building a new system with Advanced Matrix Programmer (AMP), device names can be …
17-Aug-2026
How to Disable Telnet (Omega, Ultra, and MaxColor Series)
Overview The Telnet server can be disabled on any Omega Series, Ultra Series, or MaxColor Series device. Once disabled, the device will no longer accept Telnet connections on TCP port 23 . This setting applies to an individual device. Repeat the procedure on each device where Telnet access must be disabled. Befor…
31-Jul-2026
Just Add Power Product Lifecycle and Support Status
Overview This article lists Just Add Power hardware, software, and control system integrations that have reached or are scheduled to reach End of Life or End of Support. It provides applicable support classifications and general replacement guidance. Current products are included only when identified as a suggested …
04-Aug-2026
How to Update Firmware on a Device (Omega, Ultra, and MaxColor Series)
Overview For a Just Add Power device to function correctly within a system, its firmware must be compatible with the firmware running on the other devices in the installation. This article explains how to verify the current firmware version, update an individual Omega Series , Ultra Series , or MaxColor Seri…
14-Jul-2026
How to Switch Sources using AMP for Established Standardized Systems
Overview This article explains how to switch sources in an existing AMP-standardized Just Add Power system using Advanced Matrix Programmer (AMP). The Switch Sources tool provides a graphical interface for routing Encoders (Inputs) to Decoders (Outputs). Individual Decoders can be switched independently, or all D…
30-Jun-2026
SKU Comparison Chart for Ultra Series Devices
Summary The Ultra Series devices from Just Add Power have updated SKU numbers, standardized across all distributor partners. The following chart provides a cross-reference between the previous SKUs and the updated SKUs. Comparison Chart Encoders Old Product SKU# New Product SKU# VBS-HDIP-707POE UL-707POE …
24-Sep-2025
How to Access a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how device access works for Omega, Ultra, and MaxColor Series systems and outlines the requirements needed before accessing a device. Accessing a device means establishing network communication so the device can be reached through the webUI, Telnet, or HTTP API. Before a device can b…
08-Jun-2026
How to Adjust HDCP Settings (Omega, Ultra, and MaxColor Series)
Overview High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection used on HDMI connections to prevent unauthorized recording or distribution of protected content. In a Just Add Power system, HDCP behavior can be managed at both the Encoder and Decoder level to ensure compatibility with a…
30-Apr-2026
Build a New System on an Existing Network with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…
18-Aug-2026
Applying 720p Custom EDIDs on Just Add Power Encoders
Overview Just Add Power EDIDs normally request a minimum output of 1080p or 4K. If your source device does not offer a 720p option in its own menu, you can force 720p by applying a 720p custom EDID to the connected Encoder . Warning: Applying a custom EDID immediately forces the source to re-handshake. The Encode…
01-Dec-2025
