Skip to content
You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Understand 2G Legacy Mode Firmware Compatibility

Last updated: Nov 04, 2026

Choose Firmware for Your Task

Use this reference to choose the firmware workflow, check version compatibility, and select a file for a historical A Series manual update.

Your Task What to Check
Configure or service AMP 2G Legacy Mode Use L Series firmware through AMP 2.0.0 or later in Standardized Configuration. Check device and switch compatibility.
Maintain an established A Series system Identify the existing version, check hardware support, and follow the A Series maintenance procedure.
Add or replace a device Match the destination system's firmware workflow and supported hardware. Do not choose a file by the device model alone.

For the current L Series package, use Download 2G Legacy Mode Firmware. For established A Series downloads and previous releases, use 2G Legacy Mode Firmware Release History.

Check Firmware Compatibility

L Series for AMP

L Series firmware provides the JPSW switching and configuration support used by AMP 2G Legacy Mode. All L1.x.y.z releases are video-compatible with one another; JPSW features and fixes may differ.

AMP 2G Legacy Mode is supported only in Standardized Configuration and does not support Ruckus switches. See Supported Switches for AMP Standardized Systems.

On compatible Omega Series and Ultra Series devices, L Series firmware applies the required operating state automatically. It is not a separate webUI toggle. Check the supported hardware and operating limits before changing a device's role.

Plan a system transition: Moving an established A Series system to AMP 2G Legacy Mode requires the appropriate system configuration workflow. Applying a different firmware file to one device does not complete the transition.

Established A Series Systems

Use matching A Series versions across the system unless the release documentation identifies compatibility. The A6.5.9 variants are compatible with each other and are not compatible with A Series releases earlier than A6.5.9.

A6.5.9 places compatible devices into historical 2G Mode by default. This A Series workflow is separate from AMP 2G Legacy Mode.

The historical A6.5.9 release excludes these Ultra Series models:

  • UL-707POE
  • UL-707WP2
  • UL-747POE
  • UL-708POE
  • UL-767DSS
  • UL-767AES

For devices running early A Series releases, review historical incremental-update preparation before loading a package. Those A Series procedures do not establish a direct-to-L Series minimum.

Match a Historical A Series File to the Hardware

For a manual A Series update, select the firmware file intended for the exact device model.

Table scope: These filename identifiers are the historical A Series reference through A6.5.9-LTS.v3. They are not L Series file mappings. Use the AMP workflow for L Series systems.

2G Series Hardware

Hardware Model Filename Identifier
208A 2G_RX
208POE 2G_RX
218A 2G_RX
218POE 2G_RX
218AVP 2G_RX
408A 2G_TX
408POE 2G_TX
418A 2G_TX
418POE 2G_TX
418AVP 2G_TX
428A 2G_TX
428POE 2G_TX
439A 2G_TX
449A 2G_TX
459A 2G_TX

Omega Series Hardware

These models were previously identified as 2GΩ/3G hardware.

Hardware Model Filename Identifier
OM-505POE 2G-3G_RX
OM-515POE 2G-3G_RX
OM-705POE 2G-3G_TX
OM-715POE 2G-3G_TX
ST1 2G-3G_SX

Understand L Series Version Numbers

Component Meaning
L L Series firmware intended for AMP 2G Legacy Mode.
L1 Video compatibility generation.
1.9.0 Version of the jpsw switching and configuration support.

The first number identifies the video compatibility generation. All L1.x.y.z releases are video-compatible; changes in the final three numbers identify JPSW changes.

Download Firmware

Choose the download appropriate to the system:

A6.5.9-LTS.v3 was released on 2020-11-24. For that release's detailed changes, see its release record.

The A6.5.9-LTS.v3 website download will be delisted on January 1, 2027.

Update and Verify

Follow How to Update Firmware on a Device (2G Series and 2G Legacy Mode) for the correct AMP or A Series procedure. Complete the workflow, verify the version, and test switching, video, and audio.

JADConfig is limited to established systems and reaches End of Support on January 1, 2027. Review the End of Support notice when planning ongoing service.

Release History

Detailed changes, ST1 operating notes, the historical 2gmode.sh fix, and recorded known issues belong in 2G Legacy Mode Firmware Release History.

See A6.5.9-LTS.v3, A6.5.9-LTS.BF2, or A6.5.9-LTS.BF1 for release-specific details.