-
Download 2G Legacy Mode Firmware
Download Current Firmware L Series firmware for AMP 2G Legacy Mode on 2G Series devices and compatible Omega Series and Ultra Series devices. Current version: L1.1.9.1 Release date: 2026-11-04. This firmware is also included with AMP 2.0.2. Follow the update instructions for the system's configuration workflo…
04-Nov-2026
-
Understand 2G Legacy Mode Compatibility
Overview 2G Legacy Mode allows compatible Omega Series and Ultra Series devices to operate with 2G Series Encoders and Decoders. AMP 2.0.0 or later supports these systems through its normal discovery, configuration, and firmware update workflows. On compatible Omega Series and Ultra Series devices, 2G Legacy Mode…
04-Nov-2026
-
IR Control Using the Flux Dongle V1 and V2 (2G Legacy Mode, Omega, and Ultra Series)
Overview The Flux Capacitor IR Dongle converts the RS232 port on a Just Add Power device into an IR blaster. Use this article to identify your dongle, configure the connected Just Add Power device, and send IR commands to a source or display. These instructions cover V1 and V2 dongles on supported 2G Series, Omega …
11-Nov-2026
-
2G Legacy Mode Firmware Release History
Overview Review current and previous L Series and A Series firmware records. Releases are grouped by firmware family, with the newest records first. For current L Series firmware used with AMP, see Download 2G Legacy Mode Firmware . For an established system remaining on A Series firmware, use the A6.5.9-LTS.v3 d…
04-Nov-2026
-
Understand 2G Legacy Mode Firmware Compatibility
Choose Firmware for Your Task Use this reference to choose the firmware workflow, check version compatibility, and select a file for a historical A Series manual update. Your Task What to Check Configure or service AMP 2G Legacy Mode Use L Series firmware through AMP 2.0.0 or later in Standardized Configuratio…
04-Nov-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
