* [Overview][1] * [Command][2] * [Examples][3] ![terminal][4] * * * ## Overview Whether setting up or troubleshooting a system, there are some situations where adding a static route to the computer's internal routing table is necessary: 1. If there is not a static route already added to the network router....
## Command Executed from a Windows Command Prompt "Run as Administrator" route add [destination network] mask [netmask] [switch ip] metric 2 ### Examples 1. For a J+P network of 10.0.0.0, subnet mask 255.0.0.0 and switch IP 192.168.0.254 route add 10.0.0.0 mask 255.0.0.0 192.168.0.254 m...
Docklight Scripting is a program that allows the user to build a string of ASCII or HEX characters, and then send those commands to a specific IP address and port number (TCP Socket), and is a useful tool when troubleshooting a variety of advanced features in the Just Add Power 2G and 3G platforms external to the contr...
* [Overview][1] * [How to Enable][2] * [How to Use][3] * * * ## Overview Use the _**Windows Telnet Client**_ for text communication to a switch or Just Add Power device. ![Successful connection to destination device][4] If your computer does not yet have the _**Windows Telnet Client**_ enabled, you will get ...
* [Overview][1] * [Capabilities][2] * [Setup][3] * * * ## Overview In situations where only a single network wire is available from the rack location to a display location, the same network cable that carries audio/video traffic to a Just Add Power Receiver can be used to carry data traffic to some devices at ...
* [Overview][1] * [Stacking][2] * [How It Works][3] * [Switch Connections][4] * [Port Identification][5] * [Replacement][6] * [Trunking][7] * [How It Works][8] * [Switch Connections][9] * [Port Identification][10] * [Replacement][11] * * * ## Overview When building a Just Add...