Using the Built-In DHCP Server on Just Add Power Decoders
Overview The built-in DHCP Server on a Just Add Power Decoder can provide IP addresses to third-party network devices connected to the Just Add Power Device Network, such as control processors, displays, touch panels, streaming devices, and other network-enabled equipment. For more information about supported conne…
09-Jun-2026
How to Switch Sources using JPSW API for Established Standardized Systems
Overview The JPSW switching protocol is used to control source routing in AMP Standardized systems , allowing control systems to switch video sources to one or more Decoders using simple text-based commands. In this architecture, commands are sent directly to any Just Add Power device, making each device a potenti…
30-Jun-2026
Enabling Windows Telnet
* Overview * How to Enable * How to Use Overview Use the Windows Telnet Client for text communication to a switch or Just Add Power device. If your computer does not yet have the Windows Telnet Client enabled, you will get a warning message when attempting to launch Telnet from the Windows Command Prompt tha…
04-Jan-2022
Docklight Scripting - RS232/IR/CEC/Telnet Advanced Troubleshooting Tool
Docklight Scripting is a program that allows the user to build a string of ASCII or HEX characters, and then send those commands to a specific IP address and port number (TCP Socket), and is a useful tool when troubleshooting a variety of advanced features in the Just Add Power 2G and 3G platforms external to the con…
05-Sep-2024
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
30-Jun-2026
