* [Multi-Switch Models][1] * [Stack vs Trunk][2] * [Bandwidth Considerations][3] * [SFP/SFP+ Cables][4] * * * ## Multi-Switch Models JADConfig joins switches together using Stacking topology. This means that **ALL** switches in the stack must be the same manufacturer and same model number. If the [Right Swi...
* [Overview][1] * [Training Video][2] * [Supported Switches][3] * [Luxul][4] * [Netgear][5] * [Cisco][6] * [TP-Link][7] * [Stack vs Trunk][8] * [Bandwidth Considerations][9] * [SFP+ Cables][10] * * * ## Overview If the [Right Switch][11] for a Standardized System (also known as a VLAN S...
* [Overview][1] * [Stacking][2] * [How It Works][3] * [Switch Connections][4] * [Port Identification][5] * [Replacement][6] * [Trunking][7] * [How It Works][8] * [Switch Connections][9] * [Port Identification][10] * [Replacement][11] * * * ## Overview When building a Just Add...
* [Overview][1] * [Video][2] * * * ## Overview [AMP - Advanced Matrix Programmer][3] - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system. This video demonstrates building a Standardized Configuration AV over IP HDMI matrix switching system on multiple supp...