⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Remove Luxul Stack Settings Before Building an AMP System
Overview Luxul switches configured as a physical stack must be separated and returned to factory defaults before they can be configured as individual switches with AMP. This procedure removes the existing stack relationship and prepares each switch for the appropriate AMP Build New workflow. It does not configure…
18-Sep-2026
Stacking vs Trunking for Multi-Switch Systems
Overview Stacking and trunking are different ways to connect multiple network switches. The main difference is how the switches are managed: a stack operates as one logical switch, while trunk-connected switches retain their own configurations and management interfaces. For Just Add Power systems, the configuration…
01-Oct-2026
Convert an Established Omega/Ultra JADConfig Stack-Switch System to AMP
Overview This article explains how to migrate an established Omega Series or Ultra Series system from a JADConfig Luxul switch stack to an AMP Standardized multi-switch configuration. The procedure separates the existing stacked switches, applies an individual AMP discovery configuration to each switch, reconnects …
05-Aug-2026
Multi-Switch Considerations for JADConfig Systems
Legacy For existing JADConfig systems only. End of Support Notice: JADConfig systems will reach End of Support on January 1, 2027. Migration to AMP will be required before the Just Add Power Support Team can provide further troubleshooting or system service. See JADConfig End of Support Notice for requirements…
31-Jul-2026
