* [Overview][1] * [Video][2] * * * ## Overview [AMP - Advanced Matrix Programmer][3] - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system. This video demonstrates adding a device to a Standardized Configuration while On-Site. Add Device expects that the swi...
* [Overview][1] * [Video][2] * * * ## Overview [AMP - Advanced Matrix Programmer][3] - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system. This video demonstrates building a Standardized Configuration AV over IP HDMI matrix switching system on multiple supp...
* [Overview][1] * [Video][2] * * * ## Overview [AMP - Advanced Matrix Programmer][3] - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix switching system. This video demonstrates building a Standardized Configuration AV over IP HDMI matrix switching system on a single supp...
* [Overview][1] * [Video][2] * * * ## Overview A Just Add Power Standard Video Wall is made up of multiple displays that each have their own Receiver. The displays must be the same size and orientation and must be aligned edge-to-edge in a seamless rectangle. This setup allows a source to be viewed as a single-s...
Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG500 and SG500X in stacked and unstacked setups. Video of the full JADConfig procedure for the Cisco SG300 is [available here][1]. [Download JADConfig][2] and follow along with the video to setup your Just Add Power HDMI matrix switc...
Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG300. Video of the full JADConfig procedure for the Cisco SG300 is [available here][1]. [Download JADConfig][2] and follow along with the video to setup your Just Add Power HDMI matrix switching system. [1]: https://www.youtub...
**When setting up a Just Add Power 2G or 3G system for the first time, there are a few things to remember.** **If you are having trouble getting things up and running via JADConfig, these helpful pointers might get you to the bottom of the problem quickly.** * Make sure you are attempting to configure a switch mode...
* [Overview][1] * [Download][2] * [Training Videos][3] * [Versions][4] * [Switching Multiple Displays][5] * [Changes][6] * [Other Drivers][7] * * * ## Overview This driver package is for Just Add Power 3G Ultra and MaxColor systems configured as a [Standardized AMP system][8] - through the Let's Go opt...
* [Overview][1] * [Download][2] * [Versions][3] * [Changes][4] * [Known Issues][5] * [Training Videos][6] * * * ## Overview This driver package is for RTI Integration Designer 9 or Integration Designer 11 to control Just Add Power 3G Ultra and MaxColor systems configured as a [Standardized AMP system][7]...
* [Overview][1] * [Training Video][2] * [2x2 Video Wall Template][3] * [Part 1: Add Room and Drivers][4] * [Part 2: Agents and MultiDisplay Manager][5] * [Part 3: Programming Macros][6] * [Part 4: Refresh Navigators and Go!][7] * * * ## Overview The instructions in this article will use the MultiDispla...