You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Add Devices tag

Add New Devices On-site to an Established System with AMP Alternate Configuration

Overview Advanced Matrix Programmer (AMP) can add new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders to an established Alternate Configuration system while at the jobsite. AMP communicates with one established device to retrieve the system settings and existing device assignments. The new devi…

Section: Alternate Configuration

Last Updated at

27-Aug-2026

Tags: Omega Series Ultra Series MaxColor Series Encoder Decoder Advanced Matrix Programmer AMP Training Walkthrough Firmware System Expansion Add Devices AV over IP Alternate Configuration On-Site Device Discovery

Configure New Devices Off-site for an Established System with AMP Alternate Configuration

Overview Advanced Matrix Programmer (AMP) can configure new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders at an office before they are added to an established Alternate Configuration system at the jobsite. Because AMP cannot communicate with the established system during an off-site configura…

Section: Alternate Configuration

Last Updated at

21-Aug-2026

Tags: Omega Series Ultra Series MaxColor Series Encoder Decoder Advanced Matrix Programmer AMP Alternate Configuration Off-Site Add Devices System Expansion Device Discovery Firmware AV over IP Training Walkthrough

scroll to top icon