You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.

Showing articles from MaxColor Series tag

How to Access a Device (Omega, Ultra, and MaxColor Series)

Overview This article explains how to access devices in a system environment, whether through a direct local connection or across an established network. It provides the foundational steps required to: * Connect to a device * Identify its IP address * Ensure network communication * Prepare for access using web…

section icon

Device Configuration

last updated icon

01-May-2026

device access connect to device Just Add Power Ultra Series Omega Series MaxColor Series Encoders Decoders network access device IP address network connectivity webUI access Telnet access HTTP API access local connection direct connection established system Bonjour Browser device discovery PoE switch Ethernet connection disable Wi-Fi static route DHCP AMP JADConfig system setup troubleshooting

How to Factory Default a Device (Omega, Ultra, and MaxColor Series)

Overview This article outlines the available methods to factory default a Just Add Power Omega (OM), Ultra (UL), and MaxColor (MC) Series device. Minimum Supported Firmware: * Omega (OM) and Ultra (UL) Series: B1.1.0 or newer * MaxColor (MC) Series: MAX v3.5.2 or newer Note: Omega (OM) and Ultra (UL) Series…

section icon

Device Configuration

last updated icon

04-May-2026

factory default reset device Just Add Power Ultra Series Omega Series MaxColor Series Encoders Decoders device reset restore defaults webUI reset Telnet reset debug cable reset PuTTY command line access reset_to_default.sh retain IP full reset network settings Auto IP 169.254.x.x AMP Standardized systems device reconfiguration troubleshooting system recovery firmware requirements

justOS HTTP API Overview (Omega, Ultra, and MaxColor Series)

Overview Just Add Power’s justOS HTTP API (justAPI) is a RESTful interface that allows external systems, scripts, and control platforms to monitor and interact with supported Devices. The API provides access to real-time device status, configuration settings, and command execution for both Encoders and Decoders. …

section icon

Device Configuration

last updated icon

30-Apr-2026

REST API justAPI justOS HTTP API Just Add Power API overview device API Encoders Decoders Ultra Series Omega Series MaxColor Series API integration automation third-party control device control system monitoring JSON responses API endpoints command API settings API details API GET requests POST requests network control AV over IP firmware requirements API authentication device configuration system diagnostics

Download AMP and Configure an Omega, Ultra, and MaxColor Series System

Overview AMP (Advanced Matrix Programmer) configures Omega, Ultra, and MaxColor Series devices into an HDMI matrix switching system. It is the modern replacement for JADConfig and supports both standardized and custom (alternate) configurations. If you were previously using JADConfig for Omega or Ultra systems, yo…

section icon

Advanced Matrix Programmer (AMP)

last updated icon

17-Feb-2026

3G Omega Configure Software Multicast Switching VLAN Switching Download Config Multicast AMP Advanced Matrix Programmer VLAN MaxColor Max Color Ultra Standardized Configuration Alternate Configuration MaxColor Series Ultra Series Omega Series AV over IP

scroll to top icon