-
Remove Luxul Stack Settings Before Building an AMP System
Overview Luxul switches configured as a physical stack must be separated and returned to factory defaults before they can be configured as individual switches with AMP. This procedure removes the existing stack relationship and prepares each switch for the appropriate AMP Build New workflow. It does not configure…
13-Oct-2026
-
Configure Netgear M4250 and M4350 Switches with the Just Add Power AV Profile
Overview Supported Netgear M4250 and M4350 Series switch firmware includes a built-in Just Add Power AV profile for configuring a multicast network used by an AMP Alternate Configuration system. The profile applies Netgear-tested multicast settings for Just Add Power audio, video, and USB/KVM distribution. It is …
27-Aug-2026
-
Build a New Single-Switch System with AMP Standardized Configuration
Overview Use AMP to configure a new Standardized Configuration system with one supported network switch. AMP generates the switch configuration, verifies the connected Encoders and Decoders, and configures the system for video distribution. This procedure covers Omega Series, Ultra Series, MaxColor Series, and supp…
30-Oct-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
