CLI Commands for Omega & Ultra Series Devices
Overview Omega and Ultra Series devices use the same firmware and operating system. Commands on Just Add Power alter the live behavior of the device. Commands will execute immediately, but may not persist through reboot. Requires devices to be on justOS firmware version B1.0.0 or later. For Settings that alter …
05-Jun-2026
Startup Settings for Omega & Ultra Series Devices
Overview Startup settings determine how an Omega Series or Ultra Series device behaves after it boots. They are stored in non-volatile memory and remain active after the device is power cycled. Most startup settings are configured through the Command Line Interface (CLI) using the astparam utility. This article…
02-Sep-2026
Omega & Ultra Series: B3.2.0
Download Download Latest Omega/Ultra Firmware Release Date 2026-01-13 Compatibility * B3.X.X works with all existing control system drivers that use Legacy API commands * B3.X.X does not work with B2.X.X or B1.X.X firmware * B3.X.X does not support 2G devices Release Notes Added * Web UI Network…
19-May-2026
Download Advanced Matrix Programmer (AMP) (2G Legacy Mode, Omega, Ultra, and MaxColor Series)
Overview Advanced Matrix Programmer (AMP) configures Just Add Power Encoders and Decoders into an HDMI matrix switching system. It supports Omega Series, Ultra Series, and MaxColor Series systems through Standardized Configuration and Alternate Configuration. AMP 2.0.0 adds support for 2G Series systems through A…
15-Oct-2026
