You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Software tag

How to Identify the Firmware Version of a Device (2G Series and 2G Legacy Mode)

Overview Knowing the firmware version running on your Just Add Power 2G Series Encoders and Decoders is essential when adding new devices, replacing hardware, or verifying compatibility within an existing system. Note: Several methods below require network access to the device. In many installations, this requir…

Section: 2G Legacy Mode

Last Updated at

02-Oct-2026

Tags: Firmware Software 2G 2G Hybrid Date Check Firmware Check Find Firmware 2G Series 2G Legacy Mode

Download Advanced Matrix Programmer (AMP) (2G Legacy Mode, Omega, Ultra, and MaxColor Series)

Overview Advanced Matrix Programmer (AMP) configures Just Add Power Encoders and Decoders into an HDMI matrix switching system. It supports Omega Series, Ultra Series, and MaxColor Series systems through Standardized Configuration and Alternate Configuration. AMP 2.0.0 adds support for 2G Series systems through A…

Section: Advanced Matrix Programmer (AMP)

Last Updated at

10-Oct-2026

Tags: 3G Omega Configure Software Multicast Switching VLAN Switching Download Config Multicast AMP Advanced Matrix Programmer VLAN MaxColor Max Color Ultra Standardized Configuration Alternate Configuration MaxColor Series Ultra Series Omega Series AV over IP