⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Ethernet Cable Requirements
Overview This article covers copper Ethernet connections between a network switch and the RJ45 network port of an Omega Series, Ultra Series, or MaxColor Series Encoder or Decoder. Use Cat5e or higher-rated cabling and verify that each device establishes a 1 Gbps (1000 Mbps) network link . These …
01-Oct-2026
Understand Power and Data LED Behavior (Omega, Ultra, and MaxColor Series)
Overview Just Add Power devices have a green Power LED and Data LED that can help narrow down startup, network, and video problems. On rackmount devices, use the LEDs on the port side for these checks. This article covers common LED behavior on Omega Series, Ultra Series, and MaxColor Series Encoders and Decoders. …
30-Sep-2026
Ultra Series Decoder Comparison
Overview Ultra Series Decoders connect displays and other HDMI destinations to an Ultra Series Just Add Power system. All models provide the core video distribution capabilities of the Ultra Series, but their available connections and hardware features vary. Use the comparison tables below to select the appropriate…
15-Jul-2026
Supported Switches for AMP Standardized Systems
Overview AMP can build a Standardized Configuration on any supported switch listed in this article. Standardized Configurations are compatible with Just Add Power-provided drivers . When planning a Standardized System, also known as a VLAN Switching System, select a managed gigabit Ethernet switch that can accommo…
28-Aug-2026
