-
TP-Link Switch Firmware Prevents Matrix Switching and AMP Service
Overview Certain newer TP-Link switch firmware versions could prevent matrix switching and AMP service functions from working correctly in Standardized Configuration systems. Resolved in AMP 2.0.2: Update AMP and apply its included device firmware for the system: B3.2.1, MAX v4.5.1, or L1.1.9.1. The primary res…
04-Nov-2026
-
TP-Link Switch Rejects a Configuration File in AMP 2.0.0
Overview AMP 2.0.0 may generate configuration files that some TP-Link Omada SG34XX Series switches reject during Standardized Configuration. This issue affects switches whose model names do not include the TL- prefix. Resolved in AMP 2.0.1: Update AMP and generate new switch configuration files to resolve this i…
27-Oct-2026
-
[TP-Link JetStream] Download Switch Configuration via webUI
* Overview * Walkthrough Overview Downloading a switch configuration file might be done for any of these reasons: * Having a backup copy of the switch configuration in case of failure * Copying the configuration from one switch to another Walkthrough * Login to the switch webUI * Go to the System tab along…
06-Nov-2024
-
Upload Switch Configuration to TP-Link SG34XX and TL-SG34XX Series
Overview Use this procedure to upload an AMP Discovery Configuration file or restore a switch configuration to a compatible replacement switch. For AMP Standardized Configuration systems, first confirm that the switch model and hardware version are supported and that the installed firmware meets the requirements …
04-Nov-2026
-
Multi-Switch Considerations for AMP Standardized Systems
Overview AMP supports up to 63 switches in a single Standardized Configuration system, also known as a VLAN Switching System. Use multiple switches when the required device count or installation layout cannot be accommodated by one supported switch . Before you begin: Multi-switch AMP Standardized Configuration…
27-Oct-2026
-
Supported Switches for AMP Standardized Systems
Overview AMP can build a Standardized Configuration on any supported switch listed in this article. Standardized Configurations are compatible with Just Add Power-provided drivers . When planning a Standardized Configuration system, also known as a VLAN Switching System, select a managed gigabit Ethernet switch …
04-Nov-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
