You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Debug Screen tag

Control Decoder HDMI Output (Omega, Ultra, and MaxColor Series)

Overview Omega Series, Ultra Series, and MaxColor Series Decoders provide controls for changing HDMI output immediately or configuring what happens automatically when video is lost. Choose the instructions below based on the behavior you need. Change HDMI Output Immediately Use CLI commands when an installer or c…

Section: Device Configuration

Last Updated at

19-Oct-2026

Tags: CLI Omega MaxColor Ultra Decoder Startup Settings Black Screen HDMI Output Debug Screen Video Mute Freeze Video Video Control Restore Video Disable HDMI Video Loss Video-Loss Timeout

Startup Settings (Omega, Ultra, and MaxColor Series)

Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…

Section: Device Configuration

Last Updated at

19-Oct-2026

Tags: MaxColor Startup Settings Device Configuration IP Address DHCP Server Device Name RS232 Baud Rate Serial Control USB HDCP HDR HDMI Output Debug Screen LED Behavior Image Pull Flux Capacitor Wallplate astparam CLI Command Line Omega Ultra