-
How to Name a Device (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series devices can be assigned a custom device name. Naming devices makes it easier to identify individual Encoders and Decoders when configuring, accessing, or managing a system. When building a new system with Advanced Matrix Programmer (AMP), device names can be …
17-Aug-2026
-
How to Name a Device (2G Series and 2G Legacy Mode)
Overview Devices running 2G Series firmware A5.21d or later can be assigned a custom webname. The webname appears in the device webUI and helps identify individual Encoders and Decoders within a system. Set the Device Name * Access the device CLI using one of the following methods: Open the device webUI a…
02-Oct-2026
-
Startup Settings (Omega, Ultra, and MaxColor Series)
Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…
19-Oct-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
