* [Introduction][1] * [Features of All Models][2] * [Baseline Model][3] * [Other Models][4] * [Wallplate & Rackmount Versions][5] * * * ## Introduction The Just Add Power 3G Ultra system is capable of accepting 4K60 input, but outputs a maximum of 4K30 at the display end. "Transmitter" describes the source...
## Model Number VBS-HDIP-717WP2 * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/03/717WP2_2_White.jpg ...
## Model Number VBS-HDIP-718WP4 * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/03/718WP4_1_White.jpg ...
The Just Add Power WP2 (2-gang wallplate) and WP4 (4-gang wallplate) have both HDMI and VGA inputs. There is a toggle switch on the front of each unit that is used to choose VGA or HDMI. ![Wallplate 2-gang][1] To enable auto-detection between the VGA and HDMI ports, apply this command through the Console API on the ...
## Model Number VBS-HDIP-707WP2 * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/03/707WP2_1_White.jpg ...
Wall-plate transmitters allow users to chose between VGA and HDMI distribution. There are three ways to chose how formats are toggled between. 1) Use the physical toggle button to switch between VGA and HDMI (factory default setting): astparam s v_input_select auto;astparam save;reboot 2) Detect a change in...
The 717WP2 has two ways to input audio: HDMI and Line In. Audio can only play back from one input at a time. # Settings There are five options for how to choose the audio source transmitted over the network. To select one of these options, log into the web interface of the 717WP2 and apply the desired command in the ...
* [Overview][1] * [Access][2] * [Settings][3] * [Formatting][4] * [Audio Input Selection][5] * [Input Switching Behavior][6] * [Set Startup Source][7] * [Commands][8] * [Select Video Input][9] * [Select Audio Input][10] * [Adjust Stereo Out][11] * * * ## Overview Two types of W...