You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from Device Configuration tag

Startup Settings (Omega, Ultra, and MaxColor Series)

Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…

Section: Device Configuration

Last Updated at

19-Oct-2026

Tags: MaxColor Startup Settings Device Configuration IP Address DHCP Server Device Name RS232 Baud Rate Serial Control USB HDCP HDR HDMI Output Debug Screen LED Behavior Image Pull Flux Capacitor Wallplate astparam CLI Command Line Omega Ultra

CEC over IP Control (Omega, Ultra, and MaxColor)

Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …

Section: Consumer Electronic Control (CEC)

Last Updated at

04-Aug-2026

Tags: CEC CLI Telnet Control System HDMI API HTTP API Encoder Decoder MaxColor Series Ultra Series Omega Series Device Configuration Consumer Electronics Control HDMI CEC HDMI Control Command Line Interface cec_mode CEC_SEND_BYTES