⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️

Showing articles from HDCP tag

How to Adjust HDCP Settings (Omega, Ultra, and MaxColor Series)

Overview High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection used on HDMI connections to prevent unauthorized recording or distribution of protected content. In a Just Add Power system, HDCP behavior can be managed at both the Encoder and Decoder level to ensure compatibility with a…

Section: Device Configuration

Last Updated at
30-Apr-2026

Tags: HDMI HDCP Ultra Series Omega Series AV over IP Encoders Just Add Power Decoders HDCP 1.4 HDCP 2.2 HDCP settings digital copy protection HDCP troubleshooting handshake issues no video signal signal loss HDCP compatibility reject HDCP force HDCP webUI configuration video settings source device compatibility display compatibility firmware considerations system stability 4K video content protection HDMI distribution
Startup Settings (Omega, Ultra, and MaxColor Series)

Overview Startup settings determine how a device behaves after it boots. These settings are stored in non-volatile memory and remain active after the device is power cycled. This article covers Omega Series, Ultra Series, and MaxColor Series devices running the latest firmware for their series. Before using these…

Section: Device Configuration

Last Updated at
19-Oct-2026

Tags: USB HDR Flux Capacitor Image Pull CLI Command Line RS232 Wallplate Omega astparam HDCP MaxColor Ultra IP Address Device Configuration DHCP Server Device Name Startup Settings Baud Rate Serial Control HDMI Output Debug Screen LED Behavior