How to Access a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how device access works for Omega, Ultra, and MaxColor Series systems and outlines the requirements needed before accessing a device. Accessing a device means establishing network communication so the device can be reached through the webUI, Telnet, or HTTP API. Before a device can b…
08-Jun-2026
Network Connection Through a Decoder Switchport
Overview A third-party network device can share a Decoder Switchport by connecting both the Decoder and the third-party device to the same unmanaged gigabit network switch. This is useful when only one network cable is available between the rack location and the display location, but both Just Add Power audio/video…
09-Jun-2026
Setup a Static Route for an Established Just Add Power System
Overview After a Just Add Power system has been configured, network routing must be configured before devices on the Data Network (LAN) can communicate with the Just Add Power Network (Device Network) . * Use a Router Static Route to allow all devices on the Data Network to communicate with the Just Add Power…
07-Jul-2026
