You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will be closed on Juneteenth: Friday June 19th.
announcement close button

Showing articles from DHCP tag

How to Access a Device (Omega, Ultra, and MaxColor Series)

Overview This article explains how device access works for Omega, Ultra, and MaxColor Series systems and outlines the requirements needed before accessing a device. Accessing a device means establishing network communication so the device can be reached through the webUI, Telnet, or HTTP API. Before a device can b…

section icon

Device Configuration

last updated icon

08-Jun-2026

JADConfig Bonjour Browser DHCP AMP MaxColor Series Ultra Series Omega Series Encoders Just Add Power Decoders webUI access direct connection PoE switch disable Wi-Fi troubleshooting device access connect to device network access device IP address network connectivity Telnet access HTTP API access local connection established system device discovery Ethernet connection static route system setup

How to Open the webUI of a Device (Omega, Ultra, and MaxColor Series)

Overview This article explains how to open the webUI of a device. The webUI allows you to view device status, configure settings, and perform firmware updates. Before proceeding, ensure you have network access to the device and know its IP address. If you need assistance connecting to a device or identifying its I…

section icon

Device Configuration

last updated icon

01-May-2026

JADConfig Bonjour Browser DHCP AMP Ultra Series Omega Series Encoders Just Add Power Decoders webUI access device web interface network discovery IP configuration local network setup static IP direct connection PoE switch PC connection disable Wi-Fi device status firmware updates system settings established system access static route configuration takeover assistance

Using the Built-In DHCP Server on Just Add Power Decoders

Overview The built-in DHCP Server on a Just Add Power Decoder can provide IP addresses to third-party network devices connected to the Just Add Power Device Network, such as control processors, displays, touch panels, streaming devices, and other network-enabled equipment. For more information about supported conne…

section icon

General Networking

last updated icon

09-Jun-2026

JADConfig Telnet Static IP DHCP MaxColor Series Ultra Series Omega Series AMP Standardized DHCP Server Decoder DHCP Server Network Configuration Device Network Static Addressing Third-Party Devices Network Access Decoder Switchport

scroll to top icon