-
How to Access a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how device access works for Omega, Ultra, and MaxColor Series systems and outlines the requirements needed before accessing a device. Accessing a device means establishing network communication so the device can be reached through the webUI, Telnet, or HTTP API. Before a device can b…
08-Jun-2026
-
Access an Encoder or Decoder webUI (2G Series and 2G Legacy Mode)
Overview Use an Encoder or Decoder webUI to view device information and manage available settings. The pages and features available depend on the device model and firmware. To open the webUI, you need the device's IP address and a network connection that can reach it. Choose the instructions that match your conne…
02-Oct-2026
-
Network Connection Through a Decoder Switchport
Overview A third-party network device can share a Decoder Switchport by connecting both the Decoder and the third-party device to the same unmanaged gigabit network switch. This is useful when only one network cable is available between the rack location and the display location, but both Just Add Power audio/video…
29-Aug-2026
-
Static Route Options for Accessing the Just Add Power Device Network
Overview After a Just Add Power system has been configured, network routing must be configured before devices on the Data Network (LAN) can communicate with the Just Add Power Network (Device Network) . * Use a Router Static Route to allow all devices on the Data Network to communicate with the Just Add Power…
28-Sep-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
