How to Access a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how device access works for Omega, Ultra, and MaxColor Series systems and outlines the requirements needed before accessing a device. Accessing a device means establishing network communication so the device can be reached through the webUI, Telnet, or HTTP API. Before a device can b…
08-Jun-2026
How to Adjust HDCP Settings (Omega, Ultra, and MaxColor Series)
Overview High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection used on HDMI connections to prevent unauthorized recording or distribution of protected content. In a Just Add Power system, HDCP behavior can be managed at both the Encoder and Decoder level to ensure compatibility with a…
30-Apr-2026
How to Open the webUI of a Device (Omega, Ultra, and MaxColor Series)
Overview This article explains how to open the webUI of a device. The webUI allows you to view device status, configure settings, and perform firmware updates. Before proceeding, ensure you have network access to the device and know its IP address. If you need assistance connecting to a device or identifying its I…
01-May-2026
How to Factory Default a Device (Omega, Ultra, and MaxColor Series)
Overview This article outlines the available methods to factory default a Just Add Power Omega (OM), Ultra (UL), and MaxColor (MC) Series device. Minimum Supported Firmware: * Omega (OM) and Ultra (UL) Series: B1.1.0 or newer * MaxColor (MC) Series: MAX v3.5.2 or newer Note: Omega (OM) and Ultra (UL) Series…
04-May-2026
justOS HTTP API Overview (Omega, Ultra, and MaxColor Series)
Overview Just Add Power’s justOS HTTP API (justAPI) is a RESTful interface that allows external systems, scripts, and control platforms to monitor and interact with supported Devices. The API provides access to real-time device status, configuration settings, and command execution for both Encoders and Decoders. …
30-Apr-2026
How to Reset to Factory Defaults for 2G Series Devices
Overview This article outlines the available methods to factory default a Just Add Power 2G Series device. Warning: Performing a factory default will immediately erase all configuration settings and reboot the device. This action does not prompt for confirmation. Choosing a Factory Default Method Use the metho…
04-May-2026
Switching Control with JPSW in AMP Standardized Systems
Overview The JPSW switching protocol is used to control source routing in AMP Standardized systems , allowing control systems to switch video sources to one or more Decoders using simple text-based commands. In this architecture, commands are sent directly to any Just Add Power device, making each device a potenti…
30-Apr-2026
Just Add Power System Takeover Guide: Identification, Inventory, and Documentation
Overview When servicing a Just Add Power installation—whether recently deployed or legacy—critical system details are not always available. It’s common to arrive on-site expecting a quick task, only to discover that missing documentation or unfamiliarity with the system significantly extends the visit. This article…
09-Jun-2026
