## Model Number VBS-HDIP-717WP2 * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/03/717WP2_2_White.jpg ...
The Just Add Power WP2 (2-gang wallplate) and WP4 (4-gang wallplate) have both HDMI and VGA inputs. There is a toggle switch on the front of each unit that is used to choose VGA or HDMI. ![Wallplate 2-gang][1] To enable auto-detection between the VGA and HDMI ports, apply this command through the Console API on the ...
Wall-plate transmitters allow users to chose between VGA and HDMI distribution. There are three ways to chose how formats are toggled between. 1) Use the physical toggle button to switch between VGA and HDMI (factory default setting): astparam s v_input_select auto;astparam save;reboot 2) Detect a change in...
The 717WP2 has two ways to input audio: HDMI and Line In. Audio can only play back from one input at a time. # Settings There are five options for how to choose the audio source transmitted over the network. To select one of these options, log into the web interface of the 717WP2 and apply the desired command in the ...
* [Overview][1] * [Access][2] * [Settings][3] * [Formatting][4] * [Audio Input Selection][5] * [Input Switching Behavior][6] * [Set Startup Source][7] * [Commands][8] * [Select Video Input][9] * [Select Audio Input][10] * [Adjust Stereo Out][11] * * * ## Overview Two types of W...
Most Just Add Power devices will not allow an incompatible firmware to be loaded onto them. Unfortunately, the wallplate devices - 717WP2 and 718WP4 - are close enough that their firmware files can be loaded on each other. * [717WP2: 2-gang Wallplate Transmitter][1] * [718WP4: 4-gang Wallplate Transmitter][2] If ...