⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️

Showing articles from Network Configuration tag

Using the Built-In DHCP Server on Just Add Power Decoders

Overview The built-in DHCP Server on a Just Add Power Decoder can provide IP addresses to third-party network devices connected to the Just Add Power Device Network, such as control processors, displays, touch panels, streaming devices, and other network-enabled equipment. For more information about supported conne…

Section: Network Management

Last Updated at
29-Aug-2026

Tags: JADConfig Telnet Static IP DHCP MaxColor Series Ultra Series Omega Series AMP Standardized DHCP Server Decoder DHCP Server Network Configuration Device Network Static Addressing Third-Party Devices Network Access Decoder Switchport
Build a New System on an Existing Network with AMP Alternate Configuration

Overview Use AMP to configure a new Standardized Configuration system with one supported network switch. AMP generates the switch configuration, verifies the connected Encoders and Decoders, and configures the system for video distribution. This procedure covers Omega Series, Ultra Series, MaxColor Series, and supp…

Section: Alternate Configuration

Last Updated at
23-Oct-2026

Tags: Walkthrough Training System Setup Device Discovery Static Route Multicast Switching Multicast AMP Advanced Matrix Programmer Alternate Configuration Encoder Decoder MaxColor Series Ultra Series Omega Series AV over IP Network Configuration New Installation