⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠
Convert an Established Omega/Ultra JADConfig Single-Switch System to AMP
Overview This article explains how to migrate an established single-switch Omega Series or Ultra Series system from JADConfig to an AMP Standardized configuration. The existing switch may be retained when it is supported by AMP and has enough ports for the completed system. If the existing switch is no longer avail…
05-Aug-2026
Using the Built-In DHCP Server on Just Add Power Decoders
Overview The built-in DHCP Server on a Just Add Power Decoder can provide IP addresses to third-party network devices connected to the Just Add Power Device Network, such as control processors, displays, touch panels, streaming devices, and other network-enabled equipment. For more information about supported conne…
09-Jun-2026
How to Switch Sources using JPSW API for Established Standardized Systems
Overview The JPSW switching protocol is used to control source routing in AMP Standardized systems , allowing control systems to switch video sources to one or more Decoders using simple text-based commands. In this architecture, commands are sent directly to any Just Add Power device, making each device a potenti…
30-Jun-2026
Just Add Power System Takeover Guide: Identification, Inventory, and Documentation
Overview When servicing an unfamiliar Just Add Power installation, the original system documentation may be unavailable, incomplete, or no longer reflect the equipment currently installed. Before making changes, gather information about the system hardware, switch connections, network settings, firmware, and control…
22-Jul-2026
