-
How to Use Serial over IP (Omega, Ultra, and MaxColor Series)
Overview Serial over IP allows a control system to send RS232 commands through a Just Add Power system to control sources, displays, and other endpoint devices connected to an Encoder or Decoder. Omega, Ultra, and MaxColor Series devices support three Serial Modes: * Passive: Extends a physical RS232 connection …
31-Jul-2026
-
GameView Integration with AMP Standardized Systems
Overview GameView provides tablet-based source and display control for hospitality environments. It can integrate with Just Add Power systems configured using AMP Standardized, as well as established JADConfig systems. This article explains how to prepare the Just Add Power system, DIRECTV receivers, network-cont…
04-Aug-2026
-
Serial RS232 Troubleshooting
Overview Use this article when serial commands sent through a Just Add Power device do not control the connected source or display, or when expected serial feedback is not received. Serial communication depends on the entire path between the control system and the endpoint device. Troubleshoot the path in order: ne…
31-Jul-2026
-
IR Control Using the Flux Dongle V1 and V2 (2G Legacy Mode, Omega, and Ultra Series)
Overview The Flux Capacitor IR Dongle converts the RS232 port on a Just Add Power device into an IR blaster. Use this article to identify your dongle, configure the connected Just Add Power device, and send IR commands to a source or display. These instructions cover V1 and V2 dongles on supported 2G Series, Omega …
11-Nov-2026
-
How to Use Serial over IP (2G Series)
Legacy For existing 2G Series systems only. 2G Series hardware has reached End of Life. End of Life refers to product availability and does not, by itself, mean the product has reached End of Support. Overview Serial over IP allows a control system to send RS232 commands through a Just Add Power 2G Series system…
31-Jul-2026
⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
