⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
How to Disable Telnet (Omega, Ultra, and MaxColor Series)
Overview The Telnet server can be disabled on any Omega Series, Ultra Series, or MaxColor Series device. Once disabled, the device will no longer accept Telnet connections on TCP port 23 . This setting applies to an individual device. Repeat the procedure on each device where Telnet access must be disabled. Befor…
31-Jul-2026
How to Switch Sources using AMP for Established Standardized Systems
Overview This article explains how to switch sources in an existing AMP-standardized Just Add Power system using Advanced Matrix Programmer (AMP). The Switch Sources tool provides a graphical interface for routing Encoders (Inputs) to Decoders (Outputs). Individual Decoders can be switched independently, or all D…
30-Jun-2026
How to Switch Sources using JPSW API for Established Standardized Systems
Overview The JPSW switching protocol is used to control source routing in AMP Standardized systems , allowing control systems to switch video sources to one or more Decoders using simple text-based commands. In this architecture, commands are sent directly to any Just Add Power device, making each device a potenti…
30-Jun-2026
How VLAN Switching Works in AMP Standardized Systems
Overview In an AMP Standardized Configuration, audio and video sources are routed using VLAN Switching. Each Encoder is assigned a dedicated source VLAN. To select a source, the switch changes the VLAN membership of the port connected to the Decoder so that it matches the VLAN assigned to the desired Encoder. Audio…
27-Aug-2026
