Just Add Power has Crestron switching drivers that control HDMI matrix switching on Cisco and Luxul switches. [Download the training video here][1] Cisco * SG300 * SG500 * SG500X Luxul * AMS-1208P * AMS-2600 * AMS-2616P * AMS-4424P * XMS-2624P * XMS-5248P * XMS-7048P [Download the training vid...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates using AMP VLAN to build an AV over IP HDMI matrix switching system with Just Add Power devices and a single switch. AMP - Advanced Matrix Programmer - is a software that configures 3G and MaxColor Just Add Power devices into an HDMI matrix s...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates using AMP VLAN while On-Site to add a Just Add Power Transmitter or Receiver to a system that was previously configured. Add Device: On-Site requires that the switch already has a blank port prepared for the Transmitter/Receiver. AMP - Advan...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates using AMP VLAN while On-Site to add a Just Add Power Transmitter or Receiver to a system that was previously configured. Add Device: On-Site requires that the switch already has a blank port prepared for the Transmitter/Receiver. AMP - Advan...
Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG500 and SG500X in stacked and unstacked setups. Video of the full JADConfig procedure for the Cisco SG300 is [available here][1]. [Download JADConfig][2] and follow along with the video to setup your Just Add Power HDMI matrix switc...
Just Add Power 2G and 3G HDMI over IP matrix switching systems support the Cisco SG300. Video of the full JADConfig procedure for the Cisco SG300 is [available here][1]. [Download JADConfig][2] and follow along with the video to setup your Just Add Power HDMI matrix switching system. [1]: https://www.youtub...
**When setting up a Just Add Power 2G or 3G system for the first time, there are a few things to remember.** **If you are having trouble getting things up and running via JADConfig, these helpful pointers might get you to the bottom of the problem quickly.** * Make sure you are attempting to configure a switch mode...
![][1] * [Overview][2] * [Requirements][3] * [Instructions][4] * [Limitations][5] * * * ## Overview Mira Connect is an easy-to-setup and easy-to-use smart audiovisual touchscreen and control system for conference rooms, huddle rooms, lecture halls, courtrooms, bars, restaurants, and other spaces. ![][6] N...
A common issue for first-time Just Add Power installers working with a 2G system is related to cable/satellite boxes outputting 1080i by default. While the Just Add Power 2G platform handles full 1080p perfectly, cable and satellite do not. For the best results, lock the cable/satellite box to output only 720p. For...