The 2G HD over IP Rackmount Transmitter - model number 439A - is the source- side device in a full Just Add Power 2G HDMI over IP switching matrix. A single rackmount Transmitter supports 3 sources. Model 439A supports: * Stereo or multi-channel audio * Instant-seamless switching * Video Wall * 2-way RS232 co...
The 2G HD over IP Gigabit Power over Ethernet Transmitter - model number 408POE - is the source-side device in a full Just Add Power 2G HDMI over IP switching matrix. Model 408POE supports: * Stereo or multi-channel audio * Instant-seamless switching * Video Wall * 2-way RS232 control * Image Pull * Power...
## Model Number VBS-HDIP-ST1 * * * ![][1] Go to Product Page * * * ## Compatibility 3G products are compatible with: * All 2GΩ/3G products in 3G Mode * All other 3G products in 3G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/03/ST1_5.jpg ...
## Concepts: ****Chromakey Content**** - The content that uses the Chromakey Color to separate the screen into Key Region and Foreground Region** Chromakey Color** - The color (or range of colors) to be removed from the Chromakey Content **Key Region** - The space of the Chromakey Content that contains the Chromake...
## Model Number VBS-HDIP-726TVI * * * ![][1] Go to Product Page * * * 2GΩ/3G products are compatible with: * All other 2GΩ/3G products * All 3G products in 3G Mode * All 2G products in 2G Mode [1]: https://www.justaddpower.com/wp-content/uploads/2023/02/726_5-1.jpg ...
* [Overview][1] * [Access][2] * [Settings][3] * [Formatting][4] * [Audio Input Selection][5] * [Input Switching Behavior][6] * [Set Startup Source][7] * [Commands][8] * [Select Video Input][9] * [Select Audio Input][10] * [Adjust Stereo Out][11] * * * ## Overview Two types of W...
Most Just Add Power devices will not allow an incompatible firmware to be loaded onto them. Unfortunately, the 705POE and 715POE are close enough that their firmware files can be loaded on each other. * [705POE: 2GΩ/3G POE 1080p Transmitter][1] * [715POE: 2GΩ/3G+ POE 1080p Transmitter][2] If you find yourself in ...
* [Introduction][1] * [Features of All Models][2] * [Baseline Model][3] * [Other Models][4] * * * ## Introduction Models that are labeled as _**2GΩ/3G**_ are capable of **1080p resolution maximum** and are compatible with 3G Ultra devices. "Transmitter" describes the source-side encoding device and there are...
The VBS-HDIP-709P2P Point-to-Point Transmitter requires more power than a typical 3G device, and does not ship with a power supply included. Each Just Add Power unit requires between 8-10 Watts of power. A 50-watt power supply* will be sufficient to power a single 709P2P and 4 POE Receivers connected inline. Power sup...
Most Just Add Power devices will not allow an incompatible firmware to be loaded onto them. Unfortunately, the wallplate devices - 717WP2 and 718WP4 - are close enough that their firmware files can be loaded on each other. * [717WP2: 2-gang Wallplate Transmitter][1] * [718WP4: 4-gang Wallplate Transmitter][2] If ...