⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Remove Luxul Stack Settings Before Building an AMP System
Overview Luxul switches configured as a physical stack must be separated and returned to factory defaults before they can be configured as individual switches with AMP. This procedure removes the existing stack relationship and prepares each switch for the appropriate AMP Build New workflow. It does not configure…
18-Sep-2026
How to Name a Device (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series devices can be assigned a custom device name. Naming devices makes it easier to identify individual Encoders and Decoders when configuring, accessing, or managing a system. When building a new system with Advanced Matrix Programmer (AMP), device names can be …
17-Aug-2026
Add New Devices On-site to an Established System with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can add new Omega Series, Ultra Series, or MaxColor Series Encoders and Decoders to an established Alternate Configuration system while at the jobsite. AMP communicates with one established device to retrieve the system settings and existing device assignments. The new devi…
27-Aug-2026
Configure Netgear M4250 and M4350 Switches with the Just Add Power AV Profile
Overview Supported Netgear M4250 and M4350 Series switch firmware includes a built-in Just Add Power AV profile for configuring a multicast network used by an AMP Alternate Configuration system. The profile applies Netgear-tested multicast settings for Just Add Power audio, video, and USB/KVM distribution. It is …
27-Aug-2026
How to Switch Sources using AMP for Established Standardized Systems
Overview This article explains how to switch sources in an existing AMP-standardized Just Add Power system using Advanced Matrix Programmer (AMP). The Switch Sources tool provides a graphical interface for routing Encoders (Inputs) to Decoders (Outputs). Individual Decoders can be switched independently, or all D…
30-Jun-2026
Just Add Power Product Lifecycle and Support Status
Overview This article lists Just Add Power hardware, software, and control system integrations that have reached or are scheduled to reach End of Life or End of Support. It provides applicable support classifications and general replacement guidance. Current products are included only when identified as a suggested …
04-Aug-2026
Savant Driver Availability and Support Guidelines
Overview Just Add Power supports integration with Savant . Savant drivers are available for supported Just Add Power Systems to allow source switching, Endpoint Control, and system automation. Just Add Power does not distribute Savant drivers directly. How to Obtain Savant Drivers If you are a licensed Savant in…
02-Mar-2026
How to Replace Switches using AMP for Established Standardized Systems
Overview The Replace Switches tool in Advanced Matrix Programmer (AMP) is used to replace a switch in an existing system configured using Standardized Configuration. This tool is intended for established systems only and is designed to quickly bring a replacement switch online with minimal disruption. It does not…
30-Jun-2026
How to Change Device Network Prefix using AMP Build New for Standardized Systems
Overview Just Add Power’s Advanced Matrix Programmer (AMP) enforces a standardized IP addressing scheme for all Devices to ensure consistent deployment, reliable communication, and simplified system support. By default, AMP uses the IP subnet 172.27.0.0/16 (255.255.0.0) for the Device Network. This prefix is auto…
30-Jun-2026
How to Update Firmware on a Device (Omega, Ultra, and MaxColor Series)
Overview For a Just Add Power device to function correctly within a system, its firmware must be compatible with the firmware running on the other devices in the installation. This article explains how to verify the current firmware version, update an individual Omega Series , Ultra Series , or MaxColor Series…
01-Sep-2026
